1326. Minimum Number of Taps to Open to Water a Garden

Problem Description

In this problem, you have a garden represented as a one-dimensional line that starts at point 0 and ends at point n. Along this line, there are n + 1 taps at positions 0 through n. Each tap has a range associated with it, given by the array ranges. The range ranges[i]—which is associated with the tap at position i—indicates that this tap can water the garden from position i - ranges[i] to i + ranges[i].

Your objective is to figure out the minimum number of taps that need to be opened to water the entire length of the garden (from point 0 to point n). If it's not possible to water the whole garden with the given taps, the result should be -1.

Intuition

The problem is essentially about finding the minimum number of intervals (tap ranges) needed to cover a continuous segment (the garden). This is similar to the classic interval covering problem.

To solve this problem, we can use a greedy approach:

We start by transforming the problem into an interval covering problem. We'll create an array last where each index represents the starting point of an interval in the garden, and the value at each index represents the farthest point that can be watered from this interval. This is done by iterating over the ranges array and determining for each tap the leftmost and rightmost points it can water (i - ranges[i] and i + ranges[i] respectively).
We then apply a greedy method to find the minimum number of intervals needed to cover the entire garden.
- Initialize counters for the current max right end of intervals mx, the previous furthest right end pre, and the number of taps ans.
- Iterate over the garden from 0 to n. At each point, we update mx to be the maximum of mx and the furthest we can reach from the current position (found in last[i]). If at any point mx is less than or equal to i, it means there is a gap in coverage, and we cannot water the entire garden—return -1.
- Whenever we reach the point pre (which is the end of the coverage from the selected taps), it means we need to select a new tap. Increment ans and set pre to mx.
By the end of the iteration, ans will hold the minimum number of taps needed to water the entire garden.

This approach ensures that at each step, we are extending the watering range as much as possible with the current number of taps, and we only add a new tap when necessary to cover new ground.

Learn more about Greedy and Dynamic Programming patterns.

Solution Approach

The solution provided uses a greedy algorithm to minimize the number of taps opened to cover the garden. Here's a detailed walkthrough of the implementation:

Create the last array: A list called last is initialized with 0 values and has a length of n + 1. This array will hold the maximum distance that can be watered starting from each position. The goal is to use this array to find the best tap to cover the longest distance from each point.
Populate the last array: We loop through the ranges array with the index i and range x. The variables l and r represent the leftmost (i - x) and rightmost (i + x) points that can be watered by tap i. We need to make sure that l does not go below 0, hence we use max(0, i - x). For each position l, we save the farthest point r that can be reached, by setting last[l] to max(last[l], r). This ensures that for each starting position l, we have the tap that waters the farthest.
Iterating through the garden: We initialize three variables ans, mx, and pre to track the number of taps used (ans), the current maximal right boundary (mx), and the previous maximal right boundary (pre). Now, we iterate through the garden from 0 to n.
Select taps and track coverage: During each iteration, we update mx to be the furthest point we can reach from the current point i, based on last[i]. If at any point mx is less than or equal to i, it means there is a gap, and the entire garden can't be watered, so we return -1. If we reach the pre point (where the current taps' coverage ends), it means we need to open another tap to extend the coverage, therefore we increment ans and update pre to mx.
Greedy selection: Each time we select a tap, we make the greedy choice by picking the tap that extends our coverage to the rightmost point possible. This is done by always updating mx with the maximum distance we can cover from i. Only when we have to move beyond pre do we lock in our choice of a tap and increment ans since we know up to that point we have covered with the minimum number of taps.
Returning the answer: Once the loop is complete, we have either returned -1 if the garden can't be watered completely, or we have the minimum number of taps required in ans, which we return as the final result.

In summary, by transforming the problem into finding the optimal coverage for each interval and then iteratively expanding these intervals using a greedy approach, we efficiently find the minimum number of taps needed to cover the whole garden represented by the x-axis from 0 to n.

Ready to land your dream job?

Unlock your dream job with a 2-minute evaluator for a personalized learning plan!

Start Evaluator

Example Walkthrough

Let's illustrate the greedy solution approach with a small example. Suppose our garden is represented by a line of length n = 5 and we have 6 taps positioned at 0 through 5. The ranges array provided is [1, 0, 2, 1, 2, 0], representing the range each tap can water on both sides.

Step-by-Step Solution:

Create the last array: We create an array last of length n + 1, which gives us last = [0, 0, 0, 0, 0, 0].
Populate the last array: We process the provided ranges:
- Tap 0 has range 1: it can water the garden from max(0, 0-1) to 0+1, hence we update last[0] = 1.
- Tap 1 has range 0: it can only water its own position, so no update is necessary (last[1] remains 0).
- Tap 2 has range 2: it can water from max(0, 2-2) to 2+2, so we update last[0] = 4 (since this tap offers a better range than tap 0).
- Tap 3 has range 1: waters from max(0, 3-1) to 3+1, we update last[2] = 4.
- Tap 4 has range 2: waters from max(0, 4-2) to 4+2, we update last[2] = 6.
- Tap 5 has range 0: waters only its position, no update. After updating, last = [4, 0, 6, 4, 6, 0].
Iterating through the garden: We initialize the counters ans = 0, mx = 0, and pre = 0.
Select taps and track coverage: We iterate from i = 0 to i = 5 (position n in the garden):
- At i = 0: mx = max(0, 4) = 4. No gap, continue.
- At i = 1: mx = 4. Still no gap, continue.
- At i = 2: mx = max(4, 6) = 6. As i = pre, we select this tap and update ans = 1, pre = mx = 6.
- At i = 3, 4 and 5: we don't need to update mx or ans since we've already covered the garden with pre = 6.
Returning the answer: Since we've iterated through the whole garden without encountering a gap, the final answer is ans = 1. Only one tap (at position 2) is needed to water the entire garden from 0 to 5.

Solution Implementation

1class Solution:
2    def min_taps(self, garden_length: int, ranges: List[int]) -> int:
3        # Initialize an array to track the furthest right position that can be covered by opening a tap from each point
4        max_right_from_left = [0] * (garden_length + 1)
5      
6        # Iterate over the taps and calculate the range each tap can cover. Then update the `max_right_from_left` array.
7        for tap_index, tap_range in enumerate(ranges):
8            left_bound = max(0, tap_index - tap_range)
9            right_bound = tap_index + tap_range
10            max_right_from_left[left_bound] = max(max_right_from_left[left_bound], right_bound) 
11
12        # Initialize variables for tracking the answer, the maximum distance covered so far, and the previous maximum before the last tap.
13        taps_required = 0
14        max_covered_so_far = 0
15        previous_max = 0
16
17        # Iterate through the garden and update the max coverage.
18        for pos in range(garden_length):
19            max_covered_so_far = max(max_covered_so_far, max_right_from_left[pos])
20          
21            # If at any position, the max covered distance is less than or equal to the current position, the garden cannot be fully watered.
22            if max_covered_so_far <= pos:
23                return -1
24          
25            # If the current position reaches the previous maximum coverage, it's time to open a new tap
26            if previous_max == pos:
27                taps_required += 1
28                previous_max = max_covered_so_far
29
30        # Return the minimum number of taps required to water the entire garden.
31        return taps_required
32

1class Solution {
2    public int minTaps(int n, int[] ranges) {
3        // Create an array to hold the farthest extent of water from each position.
4        int[] farthestReach = new int[n + 1];
5      
6        // Populate the farthest extent each tap can reach for each position.
7        for (int i = 0; i <= n; i++) {
8            int left = Math.max(0, i - ranges[i]); // Ensure the left index is within bounds
9            int right = i + ranges[i]; // Calculate the rightmost position current tap can cover
10            // Update the farthestReach from the left position to what the current tap can reach
11            farthestReach[left] = Math.max(farthestReach[left], right);
12        }
13      
14        // Initialize variables to track the tapping.
15        int tapsRequired = 0;     // To count the minimum number of taps
16        int currentFarthest = 0;  // To keep track of the farthest we can reach at this point
17        int lastTapPosition = 0;  // To remember the last position where we placed the tap
18      
19        // Iterate through the area to be watered excluding the last position.
20        for (int i = 0; i < n; i++) {
21            // Find the maximum distance that can be covered from the current position or before.
22            currentFarthest = Math.max(currentFarthest, farthestReach[i]);
23          
24            // If the maximum distance we can reach at this point is less than or equals to current position,
25            // it means we can't move forward from here as there is a gap. Hence, return -1.
26            if (currentFarthest <= i) {
27                return -1;
28            }
29          
30            // If the last tap position is the same as the current position,
31            // it means we need to place a new tap here and update the last tap position.
32            if (lastTapPosition == i) {
33                tapsRequired++;        // Increase the number of taps.
34                lastTapPosition = currentFarthest; // Update the last tap position to the farthest reachable from here.
35            }
36        }
37      
38        // Return the minimum number of taps required.
39        return tapsRequired;
40    }
41}
42

1#include <vector>
2#include <algorithm>
3using namespace std;
4
5class Solution {
6public:
7    int minTaps(int gardenLength, vector<int>& ranges) {
8        // Create a vector to store the furthest extent each tap can water, initializing to the garden's length.
9        vector<int> maxWateredPosition(gardenLength + 1);
10      
11        // Determine the range each tap can water and update the maxWateredPosition array.
12        for (int i = 0; i <= gardenLength; ++i) {
13            int leftMost = max(0, i - ranges[i]); // Ensure we don't go below index 0.
14            int rightMost = i + ranges[i]; // Calculate the rightmost watering position of current tap.
15            // Update the farthest position that can be watered from leftMost.
16            maxWateredPosition[leftMost] = max(maxWateredPosition[leftMost], rightMost);
17        }
18
19        // Initialize counters and flags for finding the minimum number of taps.
20        int minTapsRequired = 0; // Counts the minimum number of taps required.
21        int maxReachable = 0; // Tracks the maximum position reachable so far.
22        int lastMaxReach = 0; // Remembers the last maximum reach when a new tap is turned on.
23
24        // Iterate over the garden, keeping track of the reachable range.
25        for (int i = 0; i < gardenLength; ++i) {
26            // Update maxReachable with the furthest position watered by taps up to position i.
27            maxReachable = max(maxReachable, maxWateredPosition[i]);
28          
29            // If the maxReachable position is less or equal to the current position, we can't water the whole garden.
30            if (maxReachable <= i) {
31                return -1; // The whole garden cannot be watered, so return -1.
32            }
33          
34            // When we reach the lastMaxReach, it means we have to turn on a new tap.
35            if (lastMaxReach == i) {
36                ++minTapsRequired; // Increase the number of taps used.
37                lastMaxReach = maxReachable; // Update the last maximum reach.
38            }
39        }
40
41        // Return the calculated minimum number of taps required to water the entire garden.
42        return minTapsRequired;
43    }
44};
45

1function minTaps(n: number, ranges: number[]): number {
2    // Initialize an array to hold the furthest right each tap can reach starting from every point
3    const furthestRight = new Array(n + 1).fill(0);
4
5    // Iterate through the taps and calculate the furthest right reach for each point
6    for (let i = 0; i < n + 1; ++i) {
7        const leftBoundary = Math.max(0, i - ranges[i]); // The leftmost point the tap can cover
8        const rightBoundary = i + ranges[i]; // The rightmost point the tap can cover
9        // Update the furthest right point that can be reached from the left boundary
10        furthestRight[leftBoundary] = Math.max(furthestRight[leftBoundary], rightBoundary);
11    }
12
13    let tapsNeeded = 0; // Counter for the minimum number of taps needed
14    let currentMax = 0; // The current maximum right boundary that can be reached
15    let previousMax = 0; // The previous maximum right boundary upon the last tap opening
16
17    // Iterate over the array to find the minimum number of taps needed to cover the range [0, n]
18    for (let i = 0; i < n; ++i) {
19        // Update current maximum reach
20        currentMax = Math.max(currentMax, furthestRight[i]);
21        // If at any point the maximum reach is less than or equal to the current position,
22        // it means the garden cannot be fully covered, so return -1
23        if (currentMax <= i) {
24            return -1;
25        }
26        // If the current position reaches the previous max, a new tap must be opened
27        if (previousMax == i) {
28            tapsNeeded++;
29            previousMax = currentMax; // Update the previous max to the current max
30        }
31    }
32
33    // Return the minimum number of taps needed to water the entire garden
34    return tapsNeeded;
35}
36

Time and Space Complexity

Time Complexity

The given Python code involves a single pass to transform the ranges list into the last list, followed by another single pass to find the minimum number of taps needed. Therefore, this algorithm runs in two linear passes over an array of length n + 1.

The first pass is constructing the last array, which involves iterating over the ranges list once, resulting in O(n) complexity, where n is the length of the ranges list.
The second pass is the loop that determines the minimum number of taps by iterating once through the last array, which is also O(n) complexity.

Combining both passes, the overall time complexity remains O(n) because they are sequential, not nested.

Space Complexity

The space complexity is determined by the additional space used by the algorithm besides the input. Here, the last array of size n + 1 is an auxiliary space used to store the farthest point that can be reached from each index. Therefore, the space complexity for the last array is O(n).

No other data structures that are dependent on the size of the input are used, so the total space complexity is O(n).

Learn more about how to find time and space complexity quickly using problem constraints.

Discover Your Strengths and Weaknesses: Take Our 2-Minute Quiz to Tailor Your Study Plan: